SAINT-GOBAIN K30-0.2mm-MD

SAINT-GOBAIN K30-0.2mm-MD is a black polyurethane foam with a core thickness of 0.2 mm. This foam delivers ultra-low rebound and is laminated with a PET backing film, which greatly boosts dimensional stability during processing. It is an ideal sealing material for products that require an ultra-high compression ratio or ultra-low rebound characteristics. Its smooth surface allows for simple and convenient assembly.

Color: Black
Nominal overall thickness: 0.2 mm
Roll Length: 100 m
Roll Width: 680 mm
Density: 680 kg/m³

SAINT-GOBAIN K30-0.2mm-MD Technical Data Sheet

Density (lb./cu.ft)	43
Density(kg/m3)	680
Compression rebound force 12.7mm/min @ 25% Deflection	26 psi
Compression rebound force 12.7mm/min @ 25% Deflection	180 kPa
Compressive stress @ 25% Deflection	45 psi
Compressive stress @ 25% Deflection	315 kPa
Compression deformation @ 73 °F (23°C)	＜5%
Compression deformation @ 158 °F (70°C)	＜10%
Recommended maximum operating temperature (short-term) °F	250
Recommended maximum operating temperature (short-term) °C	121
Thermal conductivity BTU-in (W/m-C)	0.6
Thermal conductivity hr-sqft"F (W/m-C)	0.086
Surface resistance(ohm/sq)	3 x 10^15
Volume resistance(ohm.cm)	4 x 10^14
Breakdown voltage (volts/mil)	47
Atomization(SAE-J 1756 3hrs@100°C)	Pass

SAINT-GOBAIN K30-0.2mm-MD Features

Outstanding resistance to compression set
Excellent rebound performance
Effective stress dispersion
Good resistance to chemicals and moisture
Maintains flexibility even in harsh working environments
Easy to die-cut into all kinds of intricate custom shapes
Optional adhesive coating on PET liner: eliminates separate gluing procedures and improves cost efficiency
PET backing guarantees consistent dimensional accuracy during die-cutting